Milk steamer made from an old 12 cup Bialetti. With build in pressure gage, steam nozzle and lever. Reaching almost 3bar of steam before the pressure release kicks in, enough for one cappuccino of steam.
The milksteamer has a pressure gage to check when the steamer is ready. The original Bialetti safety valve acts as safety for the steamer, going off at approx. 2.8bar
Hangboard for training finger strength on different edges, made for climbers.
Edges depths of 40mm, 30mm, 20mm and 15mm for a variety of 4, 3 or 2 fingers. 2 mono pockets, sloper angles of 30 and 20 degrees and Jugs for pull-ups (normal and wide positions)
A climber training finger strength, in action. Training is done by hanging from the edges, either full body weight or with additional weight on a belt.
Original garden table in need for new table top
Original metal frame will be reused
New table top made of thermal treated wood
Close-up of the table top's edge
The finished garden table with new table top
Clay model was made to determine the ergonomic of the camera grip with build in battery grip
Grip profile, made out of waste padouk wood
Inside is shaped to fit the camera's original grip
the contour of the grip is rounded
The grip takes a battery bank in the underside, for charging the camera on the go
Finished shape of the camera grip. Glued to a SmartRig frame, housing the battery bank with accessibility to the on-button
Close-up of the finished shaping
Finished with wood oil for protection. With mounted Sony A6000 camera
